Building Materials BS 476-6 Fire Propagation Test Flame Testing Equipment

Building Materials BS 476-6 Fire Propagation Index Tester Flame Testing Equipment

BS 476-6 Fire Propagation Index Tester Product Introduction:

The BS 476-7 test method is a standard method for evaluating the flame spread characteristics of a material surface. It is mainly used to determine the fire resistance of wall cladding and ceiling materials. The test results are presented in the form of flame spread distance and index. During the test, the specimen is exposed to a combination of radiant heat source and open flame. The heat flux density of the radiant panel is set to 30 kW/m². Three minutes after the start of the test, the intensity of the auxiliary gas flame is adjusted to 1000 BTU/min. At 8 minutes into the test, the gas output is reduced to 800 BTU/min, and then maintained at a stable output until the test is completed. The entire test lasts for 15 minutes. The test evaluates the fire resistance of the material by quantifying the expansion rate of the flame front.

BS 476-6 Fire Propagation Index Tester Standards:

BS 476 Part 6 A1: 2009 Flame spread performance test

BS 476-6 Fire Propagation Index Tester Technical Specification:

BS 476-6 Fire Propagation Index Tester features:

1. The frame structure is made of stainless steel; beautiful and corrosion-resistant
2. Equipped with igniter, electronic ignition, automatic flameout safety monitoring device
3. Stainless steel exhaust pipe with detachable parts for easy cleaning of thermocouple
4. Tube-type blowtorch
5. Sample size 225mm x 225mmx <30mm sample
6. Combustion chamber made of calcium silicate refractory board; with stainless steel exhaust pipe
7. Three sample holders, stainless steel wrapping method
8. The radiation device is: two radiation devices
9. K-type thermocouple continuously records the difference between the temperature in the chimney and the room temperature
10. Power output automatic control, automatically adjust the output power according to the test time
11. The computer automatically processes the data and can print the test report

Control System:

1. Independent electrical control cabinet
2. Intelligent system test, easy to operate
3. Imported gas flow meter, precise control of gas flow
4. Automatic calibration of radiation, automatic control of experimental radiation
5. Automatic saving of experimental data, free printing
6. Equipped with branded laptop computer

BS 476-6 Fire Propagation Test

Building Materials Fire Propagation Test

BS 476-6 Flame Testing Equipment

Building Materials BS 476-6 Fire Propagation Test Flame Testing Equipment Images